Before we have discussed the operation steps of the concrete mixer plant equipment and some precautions, today we will review some points of attention.
1.Turn the function switch on the column to the “automatic” position and press the start switch on the controller. The entire running program will automatically control the operation.
2.After the whole process is completed, it will stop automatically. If you need to stop midway during the running project, you can press the stop button and then restart. The fault is manifested by the correct value after the calibration code is applied. After the unloading, the number does not return to zero. After the zeroing, the weight of the loaded weight changes greatly, but the sensor resistance is checked. The value is in the normal range and the meter is no problem.
The angle iron of the fixed scale frame for transportation is not removed; the card is issued at the indenter and the pressure plate; the scale body interferes with the outside world; the three sensor models do not match; the material is biased when weighing the material.
If the angle iron of the fixed scale frame for transportation is not removed, it should be removed in time; if the indenter or pressure plate is issued, it should be treated in time to make it smooth and without resistance; if the scale body interferes with the outside world, it should be isolated in time; If the sensor models do not match, the sensor with the same type should be replaced; if the material is not loaded, it should be adjusted.
The guiding column of the medium concrete mixer is made of super special steel. The surface is chrome-plated with good torsion and wear resistance. The concrete mixing plant machine, electricity and liquid are driven synchronously. The height error of the same pallet product is very small, the product consistency is good; Adjusting, realizing low-frequency feeding, high-frequency forming work principle, can obtain good results for different raw materials; the power supply protection of concrete mixer is also quite strict, before the work, or after the power is turned on, the user must compare Serious inspection, first air-test test, only after the test is qualified, can be used for normal work. It should also be checked whether the drum is qualified. Under normal circumstances, the speed of the empty car is faster. If it is not special, the speed of the runner should be adjusted.
