A few days ago, we discussed how to maintain the concrete mixer. Click here to see it. Today we will continue to see it.
Cleaning the body of theconcrete mixer to remove dirt and obstacles on the body.
Check the oil and electric circuit and control equipment of the lubrication department and fill in the lubricating oil as required. Class work, water in the mixing barrel idling 1 to 2 minutes, and to check the reliability of the clutch and brake device work.
In the course of operation of the concrete mixer, check the motor, the reducer, the noise of the transmission gear is normal, and the temperature rise is too high. After each shift, the concrete mixer should be carefully cleaned.
Primary Maintenance of Concrete Mixer
Concrete mixer general working 100h after the first level maintenance.
1, concrete mixer in primary care, in addition to the daily maintenance of the work, still need to dismantle the clutch, check and adjust the brake clearance, such as the clutch, the outside of the belt wear is required to replace. In addition, it is necessary to check the wire rope, V with sliding bearing, with water system and walking wheel, etc.
2 compulsory concrete mixer in the primary care, must check the adjustment of the gap between the blade and the scraper and the lining plate, on the hopper and unloading door sealing and flexible, the clutch wear degree of a graded water system algorithm.
3 the concrete mixer with chain rotation needs to check the extension of chain pitch.
