In order to make the parts of the concrete mixing station achieve a better smooth effect, then we must not ignore its smooth work. As long as we can achieve the desired effect, we must pay attention to the following:
1. According to the rules of the smoothing instructions for the parts of the engineering concrete mixing station, the various parts of the mixing station should participate in the smooth oil with appropriate viscosity on time and on time.
2. It is necessary to keep oil eyes, oil marks, etc. closed to prevent dust, abrasive dust, and cooling intrusion.
3. It is necessary to insist on a smooth oil volume, and the oil layer participating in the oil tank or oil pool should reach the water indicated by the mooring mark. The amount of oil added to the high-speed rotating rolling bearing should be appropriate, not too much or too little, otherwise it will be damaged by heat.
4. The smooth oil in the oil tank and oil tank should be replaced regularly according to the rules of the parts manual of the mixing station. When changing oil, it is necessary to clean the oil pool with fire oil.
5. It is necessary for the smooth oil to be very pure and clean, and no impurities, dust, dense debris, and moisture should be muddy to avoid damaging the smooth effect and damaging the appearance of the parts of the concrete mixing station.
