We made a clear analysis of the non-rotation phenomenon in the production process of Medium concrete mixer, first considering severe overload, and then a large number of foreign objects between the mixing blades or side blades and the inner wall of the tank. Another reason is that the motor drive belt is too loose. The mixing shaft of the medium-sized concrete mixer exceeds the normal working load, which will cause the mixing shaft to rotate slowly. If the load is too large, the stirring shaft will stop. This situation can also cause the mixing shaft of the concrete mixer to stop or slowly rotate.
Large foreign objects between the stirring blade or side blade and the inner wall of the tank can also cause the stirring shaft to stop. The reason foreign matter can be trapped is due to the excessive gap between the mixing blade of the concrete mixer or the side wall of the concrete tank and the inner wall of the tank. A loose concrete transmission belt of a Medium concrete mixer will also cause the concrete mixer's mixing shaft to slowly rotate or stop rotating, and the motor transmission belt will be too loose, resulting in insufficient transmission power.
So how do we solve the problems of Medium concrete mixer stopping rotation, concrete mixers overloading, and mixing shafts stopped, just adjust the feed amount, discharge excess material, and reduce the rotation load of the mixing shaft. When the side blades and the inner wall are stuck with material, there will always be a sharp and harsh frictional sound before the stirring shaft stops.
In this case, stop the inspection immediately, remove the foreign matter manually, and readjust the gap between the mixing blade or side blade of the Medium concrete mixer and the inner wall of the tank. If the concrete belt of the concrete mixer is too loose, just adjust the tension of the concrete belt of the concrete mixer after stopping.
