Since the pressure of the Medium concrete mixer rises slowly, the filter is usually clogged, so it should be cleaned regularly. The second is the problem of the cylinder, because there is leakage outs
Since the pressure of the Medium concrete mixer rises slowly, the filter is usually clogged, so it should be cleaned regularly. The second is the problem of the cylinder, because there is leakage outside the cylinder. Water-stabilized mixing stations are usually painful for piston rod equipment, lack of lubricant supply, wear and damage to seals and seals, impurities in cylinders and scratches on piston rods.
We need to adjust the intermediate position of the piston rod in time, regularly check the reliability of the oil mist device, and clean it in time. Due to the advancement of the pilot solenoid valve, the valve malfunctioned and the type of vent hole was simply blocked, resulting in a seal. The active valve will get stuck in the circuit failure. In the use of concrete mixers, we can adopt the closed design of the whole station. The pressure of the mixing station increases the isolation board and the isolation chamber of the Medium concrete mixer.
In addition, the noise source of the Medium concrete mixer is mainly for the mixing host. The main problem of the noise of the mechanical equipment is the mutual accuracy of the machine itself, improving its own production level and technical level, and improving the manufacturing accuracy of the main body, tank and other positions. A feasible and perfect processing scheme is proposed to minimize the gap between equipment accessories, especially the distance between the blade and the lining in the main mixing. As far as possible, the drum prevents the sharp and harsh sound from being caught by the stone.
The location of the Medium concrete mixer is also important. In particular, the smooth flow of transportation in the area is also related to production efficiency. Because in production, not only must consider the efficiency of loading the loader, but also consider that the transport vehicle should not stop jamming, and the feed vehicle should not affect the construction on site. In addition, when the material selector completes its work, the loader should feed the material into the silo screen. The concrete mixer is convenient for pickers to go to work; but the material should not be fed too late, otherwise the material will be cut off.
Therefore, the improvement of the efficiency of the Medium concrete mixer is caused by a variety of factors, which requires the close cooperation of human factors and external factors and internal factors. In order to ensure the quality and mixing efficiency of the mixing station, the excavator can be tilted to balance the water content of the raw materials. Because the water content of black ash and white ash is determined by many uncertain factors, especially white ash, digestion quality, own quality and whether screening will affect the efficiency of white ash.
Therefore, it is very important to choose a Medium concrete mixer before using it. In order to ensure the proper construction moisture content of white ash, it is necessary to grasp the appropriate opening time. After opening, you can use the excavator to reverse the number of times until it reaches the appropriate moisture content, which can not only ensure the construction efficiency, but also ensure the gray dosage.