CONTACT US
  • Tel/Wechat/Whatsapp:
    +86-18660761303
  • Email:sales@chinacoalintl.com
  • Fix:+86-537-2350961
  • Address:No. 11, North of Kaiyuan Road, High-tech Zone, Jining City, Shandong Province, China
Position:Home  /  Industry Info  /  How To Solve The Abnormal Noise Of The Concrete Mixing Plant?

How To Solve The Abnormal Noise Of The Concrete Mixing Plant?

Date:2020-08-28     Label:

Medium concrete mixer

concrete mixing plant

stabilized soil mixing station

The concrete mixing plant will produce sound when concrete mixing plant is working, and different parts have different ways of presentation. But sometimes it is obvious that it can be judged as abnormal noise. When these problems occur, how can users solve them?

1. Abnormal sound of concrete mixing plant mixing tank

Abnormal sound of the mixing tank refers to the sharp and piercing sound produced by the mixing tank, which is generally caused by the friction between the foreign matter existing between the blade or the end scraper and the inner wall of the tank and the inner wall of the tank. The presence of foreign matter will increase the friction during stirring and make the stirring shaft run poorly. At this time, stop the machine to take out the foreign objects, and then adjust the gap between the blades, scrapers and the inner wall of the tank as required.

How To Solve The Abnormal Noise Of The Concrete Mixing Plant?

2. Abnormal sound of reducer

There are two reasons for the abnormal noise inside the reducer: one is that there is a foreign body in the reducer, which generates noise due to collision or severe friction; the other is that the bearing is damaged, and noise is generated due to increased friction at the joint during rotation.

In the working process of the concrete mixing plant, once foreign matter falls into the reducer, it will affect the normal operation of the reducer and cause great harm to the internal parts of the reducer. In severe cases, parts may be damaged or scrapped. When there are foreign objects in the reducer, it is necessary to stop the machine for disassembly and inspection, remove the foreign objects, repair or replace the damaged parts.

If the bearing is damaged, the friction at the joint will increase, and the movement of the bearing will be affected and make a lot of noise. At this time, the generated noise is often periodic, because the bearing rotates at a uniform speed, and when it turns to the damaged part, it will generate noise, so the noise will have a certain frequency. If the bearing is damaged, it needs to be replaced with a new one.

Please send us a message

Contact Us

Tel/Wechat/Whatsapp:+86-18660761375

Email:sales@chinacoalintl.com

Fix: +86-537-2350961

Address:No. 11, North of Kaiyuan Road, High-tech Zone, Jining City, Shandong Province, China

+

+

Please leave a message
skype
message