Introduction to the characteristics, working principle and application places of medium-sized concrete mixer equipment
The medium-sized concrete mixer equipment is composed of a horizontal cylinder, a transmission mechanism, a double-shaft stirring blade, and a crushing rod can be selected; when working, the two-shaft rotate in opposite directions to drive the blades of different angles to move the material in the axial and radial directions. Cyclic flipping, under the action of high linear speed, the material is thrown up in a state of weightlessness (that is, no gravity) and then falls down. The discharge port is divided into a large door type and a small door type. The large door type discharges materials quickly and without residue. The advantages of this machine are wide application range, high mixing uniformity and short mixing time.
The medium-sized concrete mixer equipment is composed of a horizontal cylinder, a transmission mechanism, a double-shaft stirring blade, and a crushing rod can be selected; when working, the two-shaft rotate in opposite directions to drive the blades of different angles to move the material in the axial and radial directions. Cyclic flipping, under the action of high linear speed, the material is thrown up in a state of weightlessness (that is, no gravity) and then falls down. The discharge port is divided into a large door type and a small door type. The large door type discharges materials quickly and without residue. The advantages of this machine are wide application range, high mixing uniformity and short mixing time.
Gravityless mixer is suitable for mixing powder and powder, granule and granule, granule and powder and adding a small amount of liquid. It is widely used in chemical industry, dry powder mortar, pesticide, ceramics, food, feed and battery industries. This machine is a high-precision mixing equipment, which has wide adaptability to mixtures. It can evenly mix materials with large differences in specific gravity, ratio and particle size, and can mix well with materials with a ratio difference of 1:1000 to 10000 or even higher. After adding a crushing device, the machine can partially crush the granular materials.
A, mixed effect
This machine is a high-precision mixer. Even if the materials have huge differences in specific gravity, particle size and ratio, they can achieve good mixing results under the rapid and violent tossing and throwing of the staggered stirring blades. After actual measurement, the CV value of the highest mixer uniformity coefficient of variation of this machine can reach ≤3%.
B. Crushing device
When the material has agglomeration phenomenon, it is necessary to add a crushing device. The "crushing rod" with a triangular tooth cover maintains a high speed of more than 1000rpm, and crushes and deagglomerates the agglomerated material in the weight loss area of the material.
C. Discharge form
The discharge form is generally a pneumatic flap valve, and the arc valve is closely embedded in the cylinder, flush with the inner wall of the cylinder, and there is no material accumulation and mixing dead ends; the standard type has a large door and a small door. The material is clean and fast, with little residue.
D. Two-piece blade
In order to reduce the replacement cost of the wearing parts of the equipment, the paddle blade can be made into two pieces, and a small movable blade is placed on the blade base, and the worn small blade can be directly replaced, which is economical and fast.
