Acceptance Criteria For Tilting Drum Concrete Mixer Installation

Date:2024-05-10     Label：

Medium-sized concrete mixer

Diesel Concrete Mixer

Tilting Drum Concrete Mixer

Automatic Concrete Mixer

Electric Concrete Mixer

Foundation setting
1. The foundation Diesel Concrete Mixer needs to be set up before the mixer is installed, including the foundation size, foundation depth, foundation firmness and other requirements;
2. Pay attention to the flatness of the overlap between the foundation and the equipment base during construction;

3. Check whether the Diesel Concrete Mixer original foundation needs to be re-processed when re-installing.

Equipment installation
1. Automatic Concrete Mixer base and the foundation should be in close contact, firmly fixed, no loose, gap and so on. Medium-sized concrete mixer base should be connected with the electric power supply and the electric power supply;
2. The Electric Concrete Mixer base should be well isolated from wires, cables, grounding wires and so on;
3. Good grounding protection, leakage protection measures when necessary;

4. Arrange in strict accordance with Medium-sized concrete mixer equipment installation drawings.

Sealing acceptance
1. Install all kinds of sealing components in strict accordance with the requirements, and keep the sealing clean. 2;
2. For the sealing part with rotating axial direction, pay attention to the Electric Concrete Mixer interface flatness and error of each part;
3. For the sealing part with temperature difference, attention should be paid to the amount of Electric Concrete Mixer thermal expansion and contraction of each part, as well as the selection of suitable sealing materials;

4. When Diesel Concrete Mixer conducting sealing test, should check whether there is leakage in each interface.

Transmission system acceptance
1. Gears, couplings and other components should be installed in place, no over-tightening or loosening;
2. Check the installation and maintenance of oil circuit, oil pump, cooling system and other facilities;
3. Check that all parts of the transmission system are lubricated in accordance with the design requirements;
4. Check whether there is any jamming or jumping in each part when conducting transmissibility test.

Acceptance of electrical system

1. Check whether Diesel Concrete Mixer electrical equipment is firmly installed, correctly connected and reliably grounded;
2. Check whether the switch of the electrical system is normal;
3. Check whether the wiring of the control equipment is correct and grounded reliably;
4. When conducting electrical tests, check whether there is any leakage or poor insulation in each part.

Conclusion

Installation and acceptance of Tilting Drum Concrete Mixer is the basis for normal operation of the mixer, and is also an important guarantee for the safety performance of the equipment. Through the strict requirements of the above aspects, it can effectively prevent the occurrence of accidents and guarantee the normal operation of Medium-sized concrete mixer.