Concrete Mixer Operation

Date:2024-07-26     Label：

Medium-Sized Concrete Mixer

Diesel Concrete Mixer

Tilting Drum Concrete Mixer

Automatic Concrete Mixer

Electric Concrete Mixer

Medium Concrete Mixers
While medium-sized concrete mixers usually include the following basic steps:
Preparation: check that the equipment is in good working order, clean up the work area, and prepare raw materials (cement, sand, aggregate, etc.).
Starting up the equipment: make sure the power supply is connected correctly, preheat the equipment (if required).
Adding materials: add cement, aggregate and sand into the mixer's hopper in order according to the proportioning requirements, and then add appropriate amount of water.
Mixing: Set the mixing time and start the mixer to make sure the concrete is evenly mixed.
Unloading: Open the discharging door, control the discharging speed and unload the concrete.

Cleaning & Maintenance: Clean the inside and surrounding area of the mixer and carry out the necessary maintenance and upkeep.

Diesel Concrete Mixer
The operating procedure of the diesel concrete mixer is similar to the above, but with special emphasis on the following points:
Check the stability of the machine: Make sure the machine is placed smoothly and the four legs are firmly supported.
Safety check: Check the electrical grounding situation to ensure safety.
Feeding order: In order to reduce the phenomenon of sticking cans, the feeding order is usually stone, cement, sand or sand, cement, stone.
Handling after shutdown: a certain amount of stones and water need to be put into the mixing before shutdown to eliminate the accumulation in the cylinder and avoid sticking to the can.
Maintenance and care: regularly clean the accumulated dust and adhering concrete, and add necessary lubricating oil.
Tilting Drum Concrete Mixer
The operation steps of tilting drum concrete mixer are as follows:
Preparation and inspection: Make sure the equipment is in good condition, clean the working area and mixing drum.
Filling: Add cement, sand, aggregate and water into the mixing drum according to the proportioning requirements.
Starting and mixing: start the mixer and adjust the mixing time (usually between 5-10 minutes) to ensure that the concrete is well mixed.
Discharge: Tilt the mixing cylinder, open the discharge port and discharge the concrete.
Cleaning & Maintenance: Clean the mixing drum and the surrounding area, and carry out the necessary maintenance and upkeep.
Automatic Concrete Mixers
The operation of an automatic concrete mixer is relatively simplified and usually consists of:
Preparation: checking the mixing drum for residue, cleaning and preparing the raw materials.
Starting and charging: start the mixer and add the raw materials into the mixing drum according to the proportioning requirements.
Automatic mixing: Press the start button, the mixer will automatically mix.
Unloading: After mixing, the concrete in the mixing drum will be unloaded automatically.
Cleaning: Clean the concrete left in the mixing drum and mixing chamber.
Electric Concrete Mixer
The operation steps of the electric concrete mixer are as follows:
Preparation: Place the mixer on a flat and stable ground and check whether the mixing drum is clean.
Turn on the power: Make sure the voltage and frequency match the requirements of the equipment.
Add materials: add cement, sand, aggregate and other materials into the mixing cylinder according to the requirement of proportioning.
Mixing: start the mixer, set the mixing time and monitor the mixing process to ensure the concrete is evenly mixed.
Discharging: After mixing, open the discharging door or tilt the mixing cylinder to discharge the concrete.
Cleaning and Maintenance: Clean the mixing drum and the surrounding area, and carry out the necessary maintenance and upkeep.