Medium-Sized Concrete Mixer is widely used in building construction and other projects, mainly responsible for the preparation of concrete. In order to ensure its efficient operation and prolong its service life, correct use and maintenance are very important. The following is a detailed introduction to the use of Medium-Sized Concrete Mixer and maintenance considerations.
I. Use of Medium-Sized Concrete Mixer
1. Preparation
Check the equipment: Before operation, check all parts of the Medium-Sized Concrete Mixer, including the motor, mixing drum, hopper, control system, etc., to make sure there is no abnormal sound or wear.
Clean up the site: make sure the environment around the Medium-Sized Concrete Mixer is neat and tidy, and remove the obstacles so as not to affect the safety during operation.
Preparation of raw materials: Prepare cement, sand, stone and water according to the construction needs, make sure the quality and proportion of raw materials meet the requirements.
2. Operation steps
Start the Medium-Sized Concrete Mixer: After confirming safety, start the power supply. According to the specific equipment, make sure to switch to the mixing mode.
Add materials: according to the capacity of the mixer and the formula, add all kinds of raw materials in the mixing drum in a certain order (usually add aggregate first, then cement and water, and finally add water).
Control the mixing time: set the appropriate mixing time according to the requirements of the concrete formula, usually it is recommended to be between 2-5 minutes to ensure full mixing.
Discharge: After mixing is completed, pour the concrete to the designated position according to the operation instructions, taking care to prevent the concrete from splashing out and affecting safety.
3. Precautions for use
Follow the operating procedures: Strictly follow the operating instructions and safety regulations of the equipment.
Do not overload: Avoid exceeding the maximum load of the Medium-Sized Concrete Mixer to prevent damage to the machine.
Feedback problems in time: If you find abnormalities in the equipment, such as sound, vibration, etc., you should stop the machine immediately for inspection and not continue to use it.
Second, the maintenance of Medium-Sized Concrete Mixer
1. Daily maintenance
Clean the equipment: after each use, make sure to clean the inside and outside of the Medium-Sized Concrete Mixer, especially the mixing drum and blades, in order to prevent curing material.
Lubrication and maintenance: Regularly lubricate the moving parts (e.g. motor, reducer, bearings, etc.) to prevent wear and tear and overheating.
2. Periodic inspection
Parts inspection: Regularly check the electrical control system, terminals and transmission system to ensure that there is no looseness, rust or corrosion.
Replacement of worn parts: Check the condition of mixing blades and other worn parts, and replace them in time if serious wear is found.
3. Quarterly maintenance
Comprehensive maintenance: It is recommended to carry out a comprehensive inspection of the equipment every quarter, including the electrical system, mechanical system and hydraulic system (if any).
Inspection of electrical components: Pay special attention to the motor and its connection, check insulation and grounding to ensure electrical safety.
4. Winter Maintenance
In the cold season, check the antifreeze measures of the equipment before use, and avoid using the unwarmed equipment in low temperature.
III. Record and Improvement
Record use: Keep detailed records of each use, maintenance records, etc. for analysis and improvement.
Train staff: Train operators regularly to ensure that they are familiar with the operating procedures and maintenance methods of the equipment.
Summarize
Medium-Sized Concrete Mixer is an indispensable equipment in construction projects, through the correct use and regular maintenance, it can not only improve the production efficiency of concrete, but also extend the service life of the equipment. Ensuring safe operation and timely maintenance is the key in the whole use process. Hope the above information can help you! If you have any other questions, please feel free to ask.
