Today I will tell you some knowledge about how to installation of cement silo in concrete mixing plant.
1. The bottom of the leg of the concrete mixing station is firmly welded to the foundation embedded parts.
2. Concrete mixing plant cement tanks are strictly prohibited from tilting the legs and deforming the legs.
3. It is strictly forbidden to strongly impact the legs and the body.
4. Once the bag is blocked, the pressure in the chamber exceeds the safety pressure of the top pressure safety valve, and the pressure safety valve can open the pressure in the release chamber to prevent the occurrence of a burst accident.
5. Do a good job in windproof and lightning protection of concrete mixing stations.
6. Regularly check the cement adhesion of the cement tank dust collector bag of the concrete mixing station and clean it in time.
7. When the cement silo is working, it must be erected by a special crane, then placed on a pre-precast concrete foundation, and the verticality of the cement silo after standing up with the horizontal plane is checked, and then the bottom and foundation are pre-formed. The embedded parts are welded firmly.
