Because the wear of the concrete mixer brings a lot of trouble to the customer, different degrees of wear will almost affect the normal operation of the concrete mixer. The wear is not avoided, but the degree of wear can be reduced. How to reduce it? In order to reduce the wear of the concrete mixer, I hope that users can carefully read the following introduction!
The first is the lubrication of concrete mixers. There are many places to be lubricated. The method and quantity of adding lubricants are different. Sometimes new lubricants need to be replaced, and regular quantitative lubricants are needed. Users must understand these lubrications. Technology to ensure the lubrication of concrete mixers.
Where the concrete mixer is more prone to wear, there are vibrating screens, mixing blades, surfaces, mixing drums, how to reduce the wear in these places? The key to the vibration of the vibrating screen is the vibration bearing. The user must choose the high quality bearing. The lubrication device should be reasonable. The user must always lubricate the bearing.
Since the mixing blade needs to stir the concrete, the general wear is more serious. This requires the user to pay attention to avoiding large pieces of hard objects or steel wires and other methods in the mixing drum when adding materials, and often repairing the mixing blades; the surface of the concrete mixer is worn. Possible causes are microseismic, sliding, impact, abrasion, rust, etc., which requires the user to pay attention when using, avoid collision, and keep the surface clean, and timely treatment when rust is found; the mixing drum is also often worn, this It is necessary for the user to clean the mixing drum immediately after the work is finished to prevent the concrete from solidifying in the mixing drum.
