With the development in recent years, the construction of new rural areas, the transformation of old cities and other aspects, the construction of roads, bridges, houses, etc. is booming. Concrete is the most important material in engineering construction. Concrete mixers are various construction sites. The ideal mixing equipment. Compared with bridge machines and cranes, the maintenance of the mixer is relatively easy, but it should not be underestimated. Perhaps a small detail will directly affect the use of medium concrete mixer, such as the cleaning of concrete mixers.
Pay attention to the following when cleaning medium concrete mixer:
First, regular maintenance and maintenance of the items specified in the maintenance procedures, such as cleaning, lubrication, fueling, etc.;
Second, before the concrete mixer is started, check whether the controllers are good. After the work stops, pour water and stones into the mixing drum for 10~15 minutes to clean, then remove the water and stones. If the operator has to enter the mixing drum for cleaning, in addition to cutting off the power supply and removing the fuse, the switch box must be locked;
Third, it is forbidden to use the method of hammering to remove the concrete accumulated in the concrete mixer cylinder, which can only be removed with a chisel;
Fourth, in the cold season, after the work is completed, the mixer roller should be cleaned with water and the water in the water pump, water tank and water pipe should be drained to prevent the water pump, water tank and water pipe from freezing.
