In order to achieve good lubrication of the parts of the engineering concrete mixing plant, the following points must be paid attention to:
1) According to the specifications of the engineering concrete mixing plant parts lubrication instruction, add appropriate viscosity lubricant to each part of the concrete mixing plant on time and on time.
2) The amount of lubricating oil must be kept sufficient, and the oil layer added to the oil tank or oil pool should reach the water level indicated by the mooring standard. The amount of oil added to the high-speed rotating rolling bearing should be appropriate, not too much or too little, otherwise it will be damaged by heat.
3) The lubricating oil must be very pure and clean, and there must be no impurities, dust, dense debris, and moisture in order to prevent damage to the lubrication and damage to the surface of the parts of the concrete mixing plant.
4) The lubricating oil in the oil tank and oil tank should be replaced regularly as specified in the parts manual of the concrete mixing plant. When changing the oil, the oil pool must be cleaned with kerosene.
5) Oil eyes, oil marks, etc. concrete mixing plant must be kept closed to prevent the intrusion of dust, abrasive debris, and thick cooling.
