Because the pressure of a Medium concrete mixer rises slowly, the filter is usually clogged and should be cleaned regularly. The second is the problem with the cylinder, because there is leakage outside the cylinder. Water-stable mixing stations are often painful for piston rod equipment, lack of lubricant supply, wear or damage to seals and seals, impurities in the cylinder and scratches on the piston rod.
We need to adjust the middle position of the piston rod in time, regularly check the reliability of the oil mist device, and clean it up in time. Due to the advancement of the first conductive magnetic valve, the valve failed, and the type of vent hole was simply blocked, resulting in a seal. The active valve will get stuck in a circuit failure. In the use of Medium concrete mixer, we can adopt the closed design of the whole station. The pressure of the mixing station increases the isolation plate and the isolation chamber of the concrete mixing station.
In addition, the noise source of the Medium concrete mixer is mainly for mixing the main machine. The main problem of the noise of the mechanical equipment is the mutual accuracy of the machine itself, improving its own production level and technical level, and improving the manufacturing accuracy of the main body, tank and other locations. A feasible and perfect processing scheme is proposed to minimize the gap between equipment parts, especially the distance between the blade and the lining in the main mix. As far as possible, the drum prevents the sharp sound from being caught by the stones.
The location of the Medium concrete mixer is also important. In particular, the availability of transport in the area is also related to production efficiency. Because in production, not only the efficiency of the loader should be considered, but also the transportation vehicle should not stop blocking, and the feed vehicle should not affect the construction on site. In addition, when the material selector is finished, the loader should feed the material into the silo screen. The concrete mixer is convenient for pickers to go to work; however, the material must not be fed too late or the material will be cut off.
Therefore, the improvement of the efficiency of the Medium concrete mixer is caused by a variety of factors. It requires the close cooperation between human factors and external and internal factors. To ensure the quality and efficiency of the mixing station, the excavator can be tilted to balance the water content of the raw materials. Because the water content of black ash and white ash is determined by many uncertain factors, especially white ash, digestive quality, self quality, and whether or not screening will affect the efficiency of white ash. In order to ensure the proper construction moisture content of white ash, it is necessary to grasp the appropriate opening time. After opening, you can use the excavator to reverse the number of times until the proper water content is reached, which not only ensures construction efficiency, but also gray dose.
