During the use of Medium concrete mixer, wear is inevitable, and wear will affect the production efficiency of the equipment. Therefore, the most important point in the production process is to minimize the wear of Medium concrete mixer.
How to reduce the wear of Medium concrete mixer and improve production efficiency?
The first is the lubrication of Medium concrete mixer. There are many places that need to be lubricated. The methods and amounts of adding lubricants are different. Sometimes it is necessary to replace new lubricants, and it is also necessary to periodically quantify fake lubricants. Users must understand these Lubrication technology to ensure the lubrication of the concrete mixer.
Vibrating screens, mixing blades, surfaces, and mixing drums are more likely to wear on Medium concrete mixer. How to reduce the wear in these places? The key to vibration screen wear is vibration bearings. The user must choose high-quality bearings. The lubrication device must be reasonable. The user must often lubricate the bearings. Because the mixing blades need to mix the concrete, the general wear is relatively serious. This requires the user to When adding materials, pay attention to avoiding large hard objects or steel wires and other methods. Mixing blades are often checked and repaired. The possible causes of wear on the surface of medium-sized concrete mixers are micro-shock, sliding, impact, abrasion, rust, etc. This requires the user to pay attention to avoid collisions and keep the surface clean when using it. When rust is found, it must be handled in time. The mixing drum is often worn out. This requires the user to clean the mixing drum immediately after the work is finished to prevent the concrete from mixing in the mixing drum. Within coagulation.
