The main body of the concrete mixing plant is continuously operating for a long time. For some reasons, the temperature of the mixer is too high. If the temperature of the mixer is too high, attention must be paid to avoid affecting the normal production work.
If you find that the current indicated by the ammeter on the operation panel of the concrete mixing plant is an intermittent increase, the common reason is: when the equipment is operating normally, you need to find the mud spoon head, then the mud spoon head is likely to be loose, the spoon head Looseness is the main cause of the periodic intermittent increase in current.
Of course, you should also check whether there is anything at the bottom of the concrete mixing plant mud spoon that hinders the rotation of the mud spoon. If the current continues to rise and does not return to the rated current, it may be caused by excessive load or low voltage. If the amount of feed is large, the feed should be adjusted. However, if it is caused by a low voltage, it is purely the cause of external power supply. You can diligently observe the current for large changes and the motor temperature rise.
If this phenomenon suddenly occurs in the concrete mixing plant, it is often due to the increase in particle size and the change in the hardness of the ore, which may be caused by different mining faces and ingredients. When the above situation occurs, the stirring process will cause corresponding changes. When a high temperature condition occurs when the concrete mixer is running, don't be too alarmed and find out the reason before you can solve the problem.
