How does a concrete mixing plant work? I will give you a brief introduction to let everyone quickly understand how the concrete mixing plant works.
The aggregate is discharged into the weighing hopper from the discharge door of the storage bin, and is weighed separately. After the measurement is completed, the weighing hopper door is opened in sequence, and the flat belt is started at the same time, and the material is discharged onto the inclined belt that is always running. The material is sent to the aggregate storage hopper on the roof; the material in the powder bin is sent to the respective weighing hopper by the screw conveyor for measurement, and the water and additives are sent to the respective weighing hopper by the water pump for measurement.
When all materials are measured, the discharge door of the aggregate storage hopper is opened, and the aggregate is discharged into the mixer. After a delay of 5s, the measured cement, fly ash, water, additives, etc. are discharged. Mixing in the concrete mixing plant, the mixed coagulant is discharged into the mixer from the discharge port of the host, and completes a working cycle.
Warm reminder In the operation and debugging of the concrete mixing plant equipment, we must pay attention to safety, pay attention to safety, pay attention to safety, and say important things three times.
