Maintenance Points Of The Mixer Drive System!

Since the specific structure of the mixing station is different, only a general description is given here, and special parts need to be maintained in accordance with the instructions. It should be specially pointed out that the dustproofing of the mixing station is particularly important. The accumulation of dust brings great inconvenience to the maintenance and repair of the mixing station, which reduces the performance of all equipment, shortens the service life and damages the lubrication. Therefore, it should be based on the principle of structure. The above produces minimal dust and is regularly cleaned and maintained.

• Each transmission gear, reduction gear box, chain, etc., according to regulations, add sufficient lubricant (fat);
• The sound of the transmission part is normal, the gearbox and bearing are not hot, and there is no oil leakage;
• The triangular belt is suitable for elastic (10-15mm in the middle), and the central part of the transmission chain should not sink more than 20mm;
• The wire rope has no large wear, the chuck and the connection are firm, and the surface has grease;
• Brakes and clutches perform well and should be replaced when the brake pads are worn to a certain extent.